09-04-2020, 02:36 PM
The EyeLink 1000 Plus camera requires a full gigabit Ethernet connection to the Host PC.
To achieve this, you must use a CAT6 (or greater) Ethernet cable. Older CAT5 cables will not provide sufficient bandwidth for the camera to communicate with the Host PC and are not supported for this purpose.
You can purchase CAT6 Ethernet cables from any major electronics retailer.
To achieve this, you must use a CAT6 (or greater) Ethernet cable. Older CAT5 cables will not provide sufficient bandwidth for the camera to communicate with the Host PC and are not supported for this purpose.
You can purchase CAT6 Ethernet cables from any major electronics retailer.